Question that arose in one of our WhatsApp groups:
When a datum is marked on a thread, what does it mean?
Answer:
A thread has three diameters(shown in Figure-1):
- Major Diameter – The outermost diameter of the thread.
– For an external thread (like a screw) – this is the largest diameter of the teeth.
– For an internal thread (like a tapped hole) – this is the innermost diameter of the hole.
- Minor Diameter – The innermost diameter of the thread.
-For an external thread – this is the diameter between the teeth.
-For an internal thread – this is the outermost diameter of the teeth.
- Pitch Diameter – A theoretical common diameter for both external and internal threads (the diameter at which the theoretical width of the groove and the tooth are equal).
Theoretically, all three share a common axis, but of course, in real life, there are no perfect parts, and three separate axes will be obtained, so it is critical to know which axis is being referred to.
In both ISO and ASME standards, the pitch diameter axis is the default for a datum, or a requirement for position and orientation on a thread. Since the pitch diameter axis is the most important, as it represents the geometric axis of the thread.
Therefore, if one wishes to choose one of the other two axes, this must be explicitly stated.
Figure-2 demonstrates application of default Axis and explicit override:
-The Perpendicularity requirement is applied to thePitch Diameter Axis (default – unless otherwise specified).
-Datum B is the Major Diameter Axis (stated explicitly), which is the axis of the smallest circumscribing outer cylinder.
If you are interested to expand your GD&T \ ISO GPS savvy, please register for updates
